The ecotube HOME irrigation system includes everything you need for a smooth and easy installation.
1 x 100 m ecotube HOME soaker hose |
1 x Senninger pressure reducer 0,69 bar |
1 x 2-way connector |
2 x Click connector |
2 x Repair connector |
5 x Straight connector 16 mm |
5 x 90° connector 16 mm |
5 x T-connector |
10 x End plugs |
1 x Installation manual |
The only things you need for the installation are standard scissors, a garden hose and a shovel.
General information
The ecotube soaker hose, colloquially known as a sweat hose or pearl hose. It is manufactured in our own production facility in the North of Germany from recycled material. The installation is done subsurface to distribute water evenly and directly to the roots of the plant. This means there is no evaporation that normally occurs through solar radiation during surface irrigation. Up to 58 % water can be saved compared to conventional irrigation methods such as watering or lawn sprinkling. The microporous surface ensures that the water emerges evenly from the ecotube soaker hose up to a length of 100 m. After a certain run-in phase, the water delivery amounts to 1.3 l/h/m.
Depending on the type of plant, there are different installation depths, which vary from 10 cm to 40 cm. You can find more information about this in the enclosed installation manual. Because of its Underground installation, the ecotube soaker hose is protected additionally from frost and mechanical damage caused by, e.g. robotic lawnmowers and will guarantee you long-term enjoyment.
Shipping weight: |
11,00 kg
|
Item weight: |
10,50 kg
|
Name |
Inside diameter[mm] |
Outside diameter[mm] |
Working pressure[bar] |
Max. length |
Recommended filtration[Mesh] |
Flow rate [l/h/m]* |
ecotube HOME |
12, 5 |
17,5 |
0,69 |
100 |
120 |
1,3 |
* Measured on the surface. The flowrate varies depending on the soil conditions. When starting the system, the flowrate is higher and will adjust over time.